Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IP camera 20-2940A-IP/21-2940A-IP, 20-2941A-IP/21-2941A-IP, 43-2940A, 50-2940A-IP
GB
Introduction
IntroductIon
1.
1.1. What's in the box
▸
IP camera module 20-2940A-IP/21-
2940A-IP/ 50-2940A-IP only suitable for
mounting in vertical Behnke frames, cannot be
installed in the lowest module installation slot
(
) of a Behnke frame, camera circuit board
prevents installation of the module housing.
The IP camera must always be located in the
module housing of the basic electronics.
▸
IP camera module 20-2941A-IP/21-2941A-IP
only suitable for mounting in horizontal
Behnke frame, cannot be installed in the
outmost module installation slot (
Behnke frame, camera circuit board prevents
installation of the module housing. The IP
camera must always be located in the module
housing of the basic electronics.
▸
IP camera module
▸
Patch cable directly connected to the camera
(incl. RJ45/RJ-45-connection adapter)
▸
Password to access the camera (to be found
on the camera cover and in the present
manual)
▸
These instructions
*
Display exemplary for 20-0001/20-0001A-IP/20-0001B-IP/20-0001-BS (basic electronics x3). Also
applies in conjunction with 20-0014/20-0014A-IP/20-0014B-IP/20-0014-BS (basic electronics x2),
20-0043/20-0043A-IP/(basic electronics x4)
25
*
) of a
*
✅
✅
✅
✅
www.behnke-online.de
Werbung
