Sonel CMP-3kR Bedienungsanleitung Seite 30

The content of this chapter should be thoroughly read and un-
derstood since it describes methods of measurements and basic
principles of interpreting measurement results.
Before starting the measurements, set the current date and time
in the meter (sec. 6.2.2).
To perform the current measurement:
 connect flexible clamp to the meter's socket,
 fasten the clamp around the tested conduit. Only one conduit
must be within the testing range of the clamp,
 read the measurement result on the display.
28
5 Measurements
CMP-3kR – USER MANUAL