Setting Up; General Information; Check Contents Of Pack; Connecting The Receiver - AUDIOLINE TEL68 Bedienungsanleitung

3

Setting up

3.1

General Information

NOTE! Before setting up, it is essential that you read the General Information at
the beginning of this operating manual.
3.2

Check contents of pack

The following items are supplied:
one telephone
one instruction manual
one spiral cable
one power supply
3.3

Connecting the receiver

After unpacking your new telephone, you must first connect the telephone
receiver to the base unit. First take short end of the spiral cable and plug it into
the socket at the bottom of the receiver. Now plug the other end into the socket
on the underside of the base unit. Feed the cable through the side opening to
the outside.
3.4

Insert batteries

Before connecting your new telephone to the telephone network, the supplied
batteries should be installed. Please always use four type AAA 1.5V batteries.
The batteries are required for the display and other features of the telephone.
Before installing or changing the batteries make sure that the telephone is not
connected to the telephone network. The battery compartment is to be found on
the underside of your telephone.
1. Open the battery compartment with a small screwdriver or a pointed object.
2. Insert the batteries. Ensure that the polarity is correct. Push the "-" pole onto
the small spring and then press the "+" pole downwards.
3. Close the battery compartment.
The battery must be changed when the display shows
42
- Setting up -
one telephone connecting cable
one receiver
one desk adapter
four batteries Type AAA 1.5V
.