6
The "R" Signal Button
You can use the "R" signal button on your telephone on private exchanges and
when using DEUTSCHE TELEKOM's T-Net functions.
6.1
"R" Button on private exchanges
If you have connected your telephone to a private exchange, you can use all the
facilities such as call transfer, automatic recall, etc. The "R" signal button gives
you access to these facilities. The FLASH time "100ms" will be required on a
private exchange. (Adjustment, see 6.3). You can find out from the dealer from
whom the equipment was purchased whether your telephone will work on your
private exchange without any problems.
6.2
"R" Button and the DEUTSCHE TELEKOM T-Net
Your AUDIOLINE telephone supports the most important DEUTSCHE
TELEKOM added value functions (e.g. brokering, call waiting, three-way
conference, etc.). The T-Net works using the "FLASH 300ms" setting
(adjustment, see 6.3). Please contact DEUTSCHE TELEKOM to gain access to
T-Net functions.
6.3
Setting the FLASH time
A. Please follow the instructions:
Press the MENU button once.
Turn the Jog dial until the "Einstellungen" message
appears in the display
Confirm with YES.
Turn the Jog dial until the "Flash Zeit" message appears in
the display.
Confirm with YES.
Use the Jog dial to set the required flash time.
Confirm with YES.
Press the NO button twice to exit programming
- R Signal Button -
Display shows:
Hinzufügen
Einstellungen
Uhr
Flash Zeit
Current flash time
100 - 300- 600 ms
Flash Zeit
61