LauraStar LIFT Bedienungsanleitung Und Sicherheitshinweise Seite 9

A
C
D E
Maintenance
WARNING: The appliance should be UNPLUGGED, OFF
and COLD before cleaning the appliance. Switch off
and unplug the appliance from the outlet. Allow your
appliance to cool down for at least 2 hours. It is preferable to
clean the appliance BEFORE use.
NOTICE! Only rinse the appliance with water. NEVER use
descaling products or other chemical products.
Cleaning the iron
If the iron's soleplate is dirty, use our soleplate cleaning mat in accordance
with the instructions. This can be obtained at www.laurastar.com or from
B your approved Laurastar retailer.
Stubborn stains can be cleaned using an abrasive dishwashing sponge.
After having completed this operation, remove the aluminium oxide
present under the soleplate by cleaning it with a damp cloth.
Indicator light for changing the filter cartridge (8)
A red indicator light signals that the filter cartridge needs to be changed
(17).
Please drain the appliance at the same time.
Changing the filter cartridge (17)
• Lift the cover of the water reservoir and remove the reservoir by pulling
on the cover. Drain the water and remove the filter cartridge (17).
• Insert a new filter cartridge (17) (available at www.laurastar.com or
from an approved Laurastar retailer) and fill the water reservoir.
• Finally, validate the change by pressing the change cartridge switch (8).
- 8 -
- 8 -
A
EN
EN
B C
D
E