LauraStar LIFT Bedienungsanleitung Und Sicherheitshinweise Seite 7

Indication on
the clothing
Extremely delicate man-made fabrics, e.g.:
D
synthetic velvet, Alcantara
"stretch" sports clothing, microfibre fabrics
polyamide/polyester, viscose, polyurethane
E
Wool, silk, synthetic fabrics
F
Cotton, linen, aramide
C
D
Material
®
Steam principle
Perfect ironing requires diffusion of steam across the fabric, in order to
relax the fibres, and drying to fix them in place. Creases can only be
completely removed if these conditions are present. For best results, first
iron the item with steam and then iron it again without steam, thereby
enabling the iron to dry the fabric.
Two steam modes
For the best possible ironing result, we offer two modes of steam ironing:
• STEAM mode (12): by pressing on one of the 2 STEAM buttons
(12), you release a jet of steam from the iron. Press several times for
multiple jets of steam.
• PULSE mode (13) (only on certain models): activate the PULSE
mode (13) by setting the button to ON, then hold down the STEAM
B
button (12) to obtain continuous small jets of steam. To deactivate
PULSE mode, set the button to OFF. You can then use STEAM mode
normally.
C
• To stop the steam, release the STEAM button (12).
Advice: to improve the quality of ironing and increase the autonomy of
your appliance, iron the fabric once using steam, then a second time
without steam to dry the fabric.
Protective soleplate (10)
The protective soleplate is indispensable for dark-coloured fabrics
that can become shiny and delicate fabrics such as silk, which have a
tendency to stick to the iron. How to use the protective soleplate:
• First place the point of the iron (2) at the front of the protective soleplate
(10) and lower the iron to fix it in place in the soleplate.
• Wait approximately 1 minute for the soleplate to reach the correct
temperature.
- 6 -
- 6 -
(synthetic suede),
B
Protective soleplate
with
with
without
D
EN
EN