Marzocchi Super Z Bedienungsanleitung Seite 9

SAG SETTING
To achieve the best performance from your
Marzocchi suspension, adjust the air pressure to
attain your proper sag setting. Sag is the amount your
suspension compresses under your weight and riding gear.
Sag range should be set to 15–20% of total fork travel.
Make sure to set sag with the compression lever
in the OPEN mode.
Watch the sag setup video at ridefox.com/sagsetup
Suggested Sag Measurements
Travel 15% sag (Firm)
150 mm (5.9 in)
160 mm (6.3 in)
170 mm (6.7 in)
180 mm (7 in)
190 mm (7.7 in) 28.5 mm (1.1 in)
Do not exceed maximum air pressure:
Super Z maximum air pressure is 120 psi.
Rider Weight
(lbs)
120-130
130-140
140-150
150-160
160-170
170-180
180-190
190-200
200-210
210-220
220-230
230-240
240-250
20% sag (Plush)
22 mm (.9 in) 30 mm (1.2 in)
24 mm (1.0 in) 32 mm (1.3 in)
26 mm (1.0 in) 34 mm (1.3 in)
27 mm (1.0 in) 36 mm (1.4 in)
38 mm (1.6 in)
Suggested Starting Points for Setting Sag
Rider Weight
(kgs)
54-59
59-64
64-68
68-73
73-77
77-82
82-86
86-91
91-95
95-100
100-104
104-109
109-113
Super Z
Pressure
54 psi (3.7 bar)
58 psi (4.0 bar)
62 psi (4.3 bar)
67 psi (4.6 bar)
71 psi (4.9 bar)
75 psi (5.2 bar)
79 psi (5.4 bar)
83 psi (5.7 bar)
87 psi (6.0 bar)
92 psi (6.3 bar)
96 psi (6.6 bar)
100 psi (6.9 bar)
104 psi (7.2 bar)
9
Super Z
Rebound Setting
13
12
11
10
9
8
7
6
5
4
3
2
1