Scheppach C-AG125-X Originalbetriebsanleitung Seite 25

• Only use the product for dry cutting or dry grind-
ing.
• The additional handle must be mounted to the
product for all work.
• Do not machine material containing asbestos. As-
bestos is considered carcinogenic.
This is the right way to behave:
DANGER
Always guide the product through the work-
piece in the counter direction!
In the opposing direction, there is a risk of kick-back.
The product can be pushed out of the cut.
• Always guide the product against the workpiece
when switched on. After machining, lift the product
from the workpiece and only then switch it off.
• Always hold the product tight with both hands
during work. Make sure that you have a secure foot-
ing.
• For the best grinding effect, move the product evenly
back and forth on the workpiece at an angle of 15° to
30° (between the grinding disc and the workpiece).
• When machining inclined surfaces, the product
must not be pushed onto the workpiece with great
force. If the speed drops significantly, the contact
pressure must be reduced to make safe, effective
working possible. If the product is suddenly complete-
ly braked or blocked, the product must be switched off
immediately.
• Cutting: Work with moderate feed and do not tilt
the cutting wheel.
• Roughing and cutting wheels become very hot
during work - allow them to fully cool before
touching them.
• Never misuse the product.
• Always make sure that the product is switched off
before inserting the battery into the product.
• If the event of danger, switch off the product im-
mediately and remove the battery. Ensure that the
product is easy to access and can be reached without
any problems in an emergency.
• During a pause in work, before performing any
work on the product and when not in use, remove
the battery. The product must always be clean, dry
and free of oil or lubricating grease.
• Remain attentive at all times! Always pay attention
to what you are doing and always use common
sense. Never use the product if you are unable to
concentrate or feel unwell.
11 Cleaning and maintenance
WARNING
Have maintenance and repair tasks that are
not described in this operating manual, car-
ried out by a specialist workshop. Use only
original spare parts.
There is a risk of accident! Always perform
maintenance and cleaning work with the bat-
tery removed. There is a danger of injury! Let
the Product cool down before all mainte-
nance and cleaning tasks. Elements of the
engine are hot. There is a danger of injury
and burning!
The product can start unexpectedly and cause injuries.
– Remove the battery.
– Allow the product to cool down.
– Remove the tool attachment.
11.1 Cleaning
1. Keep protective devices, air vents and the motor
housing as free of dust and dirt as possible. Rub the
product clean with a clean cloth or blow it off with
compressed air at low pressure. We recommend that
you clean the product directly after every use.
2. Ventilation openings must always be free.
3. Do not use any cleaning products or solvents; they
could attack the plastic parts of the product. Make
sure that no water can penetrate the product interior.
11.2 Maintenance
The product is maintenance-free.
12 Storage
Preparation for storage
1. Remove the battery.
2. Clean and check the product for damage.
Store the product and its accessories in a dark, dry and
frost-free place that is inaccessible to children.
The optimum storage temperature is between 5°C and
30˚C.
Store the product in its original packaging.
Cover the product to protect it from dust or moisture.
Store the operating manual with the product.
13 Repair & ordering spare parts
With this product, it is necessary to note that the following
parts are subject to natural or usage-related wear, or that
the following parts are required as consumables.
ATTENTION
According to the German Product Liability Act, no liabili-
ty is accepted for damage caused by improper repairs
or by not using original spare parts.
Such work should be performed by a customer service
centre or an authorised specialists. The same applies to
accessory parts.
www.scheppach.com GB | 25