SATA SATAjet 1400 S Betriebsanleitung Seite 43

Operating Instructions SATAjet 1400 S
General
■ Comply with the local regulations for safety, accident prevention, occu-
pational health and safety and environmental protection.
3. Intended Use
The side cup spray gun is used to apply paints, lacquers and other spray-
able media on suitable substrates.
4. Description
The compressed air required for spraying is supplied at the compressed
air connection.
Pull the trigger to the first pressure point to activate the pre-air control.
Continue pulling the trigger to pull the paint needle out of the fluid tip: the
material flows without pressure out of the fluid tip and is atomised by the
compressed air flowing out of the air cap.
5. Scope of Delivery
■ Side cup spray gun
■ Tool kit
■ CCS clips
■ Operating Instructions
6. Technical Design
[1-1] Connection for side cup
[1-2] Counter nut
[1-3] Adjusting screw for material
flow
[1-4]
Round / flat fan control
[1-5] Air micrometer (aif flow
control knob)
7. Technical Data
Description
Recommended gun input pressure
(application range)
Gun input pressure
(Compliant)
Max. permissible operating temper-
ature
Recommended spraying distance
[1-6] Spray gun body
[1-7] Air connection
[1-8] CCS clip
[1-9] Trigger
[1-10] Air cap
EN
0.8 - 2.4 bar
2.0 bar
60°C
15 - 25 cm
43