Using The Refrigerator; Energy Saving Tips - Waeco CoolMatic HDC275 Montage- Und Bedienungsanleitung

HDC275
➤ Determine the required cross section of the cable in relation to the cable
length according to fig. m, page 8.
Key for fig. m, page 8
Coordinate axis
l
∅
A
NOTICE!
Make sure the polarity is correct.
➤ Before starting up the device for the first time, check whether the operat-
ing voltage and the battery voltage match (see type plate).
➤ Connect the refrigerator
– as directly as possible to the poles of the battery or
– to a plug socket which is fuse protected with at least 15 A (at 12 V) or
7.5 A (at 24 V).
8

Using the refrigerator

I
NOTE
Before starting your new refrigerator for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 47).
8.1

Energy saving tips

 Choose a well ventilated location which is protected from direct sunlight.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the refrigerator more often than necessary.
 Do not leave the doors open for longer than necessary.
 Defrost your refrigerator as soon as a layer of ice forms.
 Avoid unnecessarily low temperature settings.
 Clean dust and dirt from the condenser at regular intervals.
EN
Meaning
Cable length
Cable cross section
Using the refrigerator
Unit
m
mm²
41