Using The Refrigerator; Energy Saving Tips - Waeco COOLMATIC CR-Serie Bedienungsanleitung

_cr-kuehlschraenke.book Seite 44 Montag, 6. April 2009 1:03 13

Using the refrigerator

Proceed as follows when you connect the refrigerator to the AC supply:
Proceed as follows when you connect the refrigerator to a DC supply when
a rectifier is fitted:
8
I
8.1
44
Downloaded from www.Manualslib.com
Fix the rectifier as shown in the location foreseen, behind the refrigerator
(fig. g, page 10).
Protect the AC circuit using a slow-blow fuse (250 V/4 A).
Connect the power cable to the AC power supply.
Plug in the connecting cable to the AC socket (fig. g 1,page 10).
Connect the loose DC cable (fig. g 2, page 10) to the battery:
– Red cable: positive battery terminal
– Black cable: negative battery terminal
Using the refrigerator
Note
Before starting your new refrigerator for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and care" on page 48).

Energy saving tips

Choose a well ventilated installation location which is protected from
direct sunlight.
Allow hot food to cool down first before you put it in the refrigerator.
Do not open the refrigerator more often than necessary.
Do not leave the door open for longer than necessary.
Defrost your refrigerator as soon as a layer of ice forms.
Avoid unnecessarily low temperature settings.
Clean dust and dirt from the condenser at regular intervals.
manuals search engine
COOLMATIC CR Series