Using The Refrigerator; Energy Saving Tips; Connecting The Refrigerator - Waeco MyFridge MF-6W Bedienungsanleitung

Using the refrigerator

6 Using the refrigerator
NOTE
I
Before you switch on your new refrigerator for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter "Cleaning and mainte-
nance" on page 20).
6.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
6.2

Connecting the refrigerator

DANGER! Danger of fatal injuries!
D
Never handle plugs and switches if you have wet hands.
➤ Before you start up the device for the first time, verify that the operating
voltage matches the mains voltage (see type plate).
➤ Connect the device as follows:
 With the mains adapter supplied to the 100-240 V AC mains
 With the 12 V lead supplied to a 12 V socket
18
MF-6W
EN