Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LOADING AND UNLOADING A VIDEO CASSETTE
UNLOADING
yo
— z
=
T
qOte| GO (22) ee
FADER
Bey
FULL AUTO. B/E FOCUS
Make sure the unit is in theStop mode. Press the
EJECT button. The cassette holder will open.
FADER
PLAY
FULL AUTO B/E
FOCUS
button.
Insert the cassette with its printed arrow facing
Close the cassette holder by pushing its center
outward.
area.
@When not in use, switch off power.
First remove
tape
slack, then insert the
Notes:
@Do
not repeat loading and unloading
of the
cassette without running the tape, as this will
slacken the tape, causing tape damage.
@When
the battery is discharged, the tape is un-
loaded
and
the
power
turns
off.
However,
pressing the POWER
switch while holding the
EJECT button pressed, turns the power on and
ejects the cassette.
Close the cassette holder by pushing its centre
area.
13
Werbung
