Rosenbauer RS 14 SUPER SILENT EFI Betriebsanleitung Seite 80

Rosenbauer – RS 14 EFI & RS 14 SUPER SILENT EFI
Caution! Leaking engine oil and gasoline contaminates the soil and ground water
∙ Do fill fuel cans to the maximum
∙ Do not spill any fuel
Connecting the fuel cans
∙ Open the cap of the fuel can
∙ Insert the hose into the fuel can
∙ Latch the cap of the refueling set onto the fuel can
Caution! Hot parts of the unit can cause flammable and explosive substances
to ignite.
∙ Do not expose the canister to direct sunlight or heat radiation
∙ Note that the gasoline in the gasoline tank can heat up while operating with external
fuel cans.
∙ Do not open the tank cover of the own tank
Fitting the refueling set to the power generator
∙ Remove cover stopper from the quick coupler on the external refuelling connector
∙ Remove the cover plug from the refueling set
∙ Push back the knurled sleeve of the quick-release coupling of the refueling set
∙ Quick release coupling of the refuelling set put on the external refuelling connector
counterpart
Refueling unit
∙ Fit the refueling set to the external fuel can
∙ Plug the refuelling set connector into the external refuelling connector
∙ Press the EXT button
Removing the refueling set from the power generator
∙ Push back the knurled sleeve of the quick-release coupling of the refueling set
∙ Pull refuelling set from external refuelling connector
∙ Plug cover stopper onto external refuelling connector
∙ Put the cover plug on the refueling set
Replacing fuel cans during operation (continuous operation)
∙ Place full fuel can next to the empty one
∙ Open the cap of the full fuel can
∙ Deactivate external refuelling (press the EXT button)
∙ Unlatch the cap of the refueling set on the empty fuel can
∙ Remove the refueling set with the hose
∙ Insert the hose into the full fuel can
∙ Latch the cap of the refueling set onto the full fuel can
∙ Activate external refuelling (press the EXT button)
80