Rosenbauer RS 14 SUPER SILENT EFI Betriebsanleitung Seite 69

Oil pressure failure
Illuminated before the power generator starts. Once the engine has been
started and is running, the warning symbol disappears. If the symbol is shown
during operations, there is no oil pressure and the engine is not being suffi-
ciently lubricated. This can cause danger to persons and cause damage to the
combustion engine.
The power generator will not shut down automatically!
Engine overheating warning sign
This lights up in connection with an audible signal if the combustion engine
overheats. The overheating can endanger individuals and material. Reasons
for overheating include e.g. impermissible operating conditions, poor air
supply and ventilation conditions, wrong fuel, etc. In these cases, you must re-
duce the power consumption. Provide an air supply and ventilation to support
cooling.
The power generator will not shut down automatically!
Emergency stop active
This warning sign illuminates when the emergency stop button is pressed.
Fuse monitoring
Illuminates when a fuse has blown.
Motor warning
This warning sign illuminates in case of a motor trouble. Contact a service
center as soon as possible.
Fuel warning
This warning appears when the tank fill level sinks below 25 %.
Ground wire test
See point 5.5.
11 OPERATING MODE INDICATORS
APC
APC
This sign is activated if the power generator is at risk of thermally overheating.
Automatic power control is activated and prevents overheating of the power
generator by reducing the output power at the socket.
Reduce load!
Immediately swivel out power generator!
RS 14 EFI & RS 14 SUPER SILENT EFI – Rosenbauer
EN
69