Rosenbauer RS 14 SUPER SILENT EFI Betriebsanleitung Seite 70

Rosenbauer – RS 14 EFI & RS 14 SUPER SILENT EFI
ECO Mode (= speed reduction)
ECO
This sign is or will only be activated when the "ECO Mode" option has been
selected. This sign illuminates when "ECO Mode" is activated. When starting
the power generator, "ECO Mode" is always active and can be deactivated by
pressing the ECO button (also refer to 1-9 operating elements). The display
flashes when the speed is reduced.
External refuelling
EXT
See point 1-9 Operating elements.
This sign will illuminate when external refuelling has been activated. The
display flashes when the tank filling process (automatic tank level control) is
running.
12 PAGE OVERVIEW
100 %
0.0kW 1.8kW
U
L1 L2
70
Main screen
The main screen shows the most important informa-
17%
tion at a glance:
∙ Fuel fill level: The tank display shows the fuel fill
level in the tank of the power generator. A red bar
and the "fuel warning" warning message indicate that
U
refuelling is necessary. If the tank is not refueled you
must anticipate the engine shutting down due to miss-
G
ing fuel. If the power generator is not level, the fuel fill
level at the fuel sender is shown.
∙ Overall load
∙ Voltage within permissible range
(green = ok, red = not ok)
Detailed view
The detail view displays the load distribution, i.e.,
0.0kW
power per phase and whether the voltage is within the
permissible range. This view is especially important to
firefighters, because in the event of an overload they
can see exactly where it exists with just the push of a
U U
button and react immediately.
∙ Load display of the phases L1 L2 L3
L3
The load display indicates the load of the individual
phases. A green bar indicates that the power generator
is operating within permissible limits. The bar color
changes to red if the phase load limit is exceeded.
In this case the load must be distributed onto multiple
phases If the total permissible load on the power
generator is exceeded, all three bars show red. The