Werbung
START/PROTECT Operation
The controller can operate in two modes: Start and Protect.
In Start, the 3 output channels can provide all the output power
regardless of the pump condition up to the short circuit condition.
This operating mode must be used to start the pump at high pressure.
In Protect, the controller limits the output current and switches off
the HV when the current exceeds the threshold value (8 mA) for more
than 2 seconds.
Disposal
Meaning of the "WEEE" logo found in labels
The following symbol is applied in accordance with the EC WEEE
(Waste Electrical and Electronic Equipment) Directive.
This symbol (valid only in countries of the European Community)
indicates that the product it applies to must NOT be disposed of
together with ordinary domestic or industrial waste but must be sent
to a differentiated waste collection system.
The end user is therefore invited to contact the supplier of the device,
whether the Parent Company or a retailer, to initiate the collection
and disposal process after checking the contractual terms and
conditions of sale.
Ion Pumps Control Unit (Battery Backup) User Manual / 87-900-117-01 (D)
Installation Procedure
Disposal
4
73/94
Werbung
