Inhaltsverzeichnis
Werbung
Signal erfassen
2.
Push Bus. Turn Multipurpose a to scroll through the list of bus types and select the desired bus: Parallel, ARINC429, I
SPI, RS-232, CAN, LIN, FlexRay, Audio, USB, Ethernet, or MIL-STD-1553.
The actual menu items shown will depend on your model oscilloscope and the application modules installed.
3.
Push Define Inputs. The choices depend on the selected bus.
•
Use the side menu buttons to define parameters for the inputs, such as specific signals to an analog or digital channel.
•
If you select Parallel, push the side menu button to enable or disable Clocked Data.
•
Push the side menu button to select the Clock Edge on which to clock data: rising edge, falling edge, or both edges.
•
Turn Multipurpose a to select the Number of Data Bits in the parallel bus.
•
Turn Multipurpose a to select the desired bit to define.
•
Turn Multipurpose b to select the desired analog or digital channel as the source for the bit.
64
Benutzerhandbuch für die Oszilloskop-Baureihe MDO4000C
2
C,
Werbung
Inhaltsverzeichnis
