Husqvarna TS 300 E Bedienungsanweisung Seite 7

• Regularly do a check of the condition of the personal
protective equipment.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
• Do not use a product with safety devices that are
damaged or do not operate correctly.
• Do a check of the safety devices regularly. If the
safety devices are damaged or do not operate
correctly, speak to your Husqvarna approved service
agent.
• Do not change the safety devices.
• Do not use the product if protective plates, protective
covers, safety switches or other protective devices
are damaged or not attached.
Blade guard
The blade guard keeps dust away from the operator and
prevents injury if the cutting blade breaks.
To do a check of the blade guard
1. Make sure that the blade guard is correctly attached
before you start the product. Do not use the product
if the blade guard is missing, has cracks or other
damage.
2. You must replace the blade guard if it has cracks or
is damaged.
ON/OFF buttons
The ON/OFF buttons are used to start and stop the
product.
2282 - 002 - 07.02.2024
Read the warning
To do a check of the ON/OFF buttons
1. Push the ON button to start the product.
2. Make sure that the product starts.
3. Push the OFF button to stop the product.
4. Make sure that the product stops.
Locking hook function, conveyor cart
The locking hook function is used to lock the conveyor
cart in position during transport.
To do a check of the locking hook function, conveyor
cart
1. Pull out the locking hook and push the locking hook
to the right to put it in the locked position.
2. Make sure the conveyor cart is locked in position.
7