Husqvarna TS 300 E Bedienungsanweisung Seite 3

Symbols on the product
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the manual carefully and make
sure that you understand the instructions
before you use this product.
Use approved hearing protection, eye
protection and respiratory protection.
Personal protective equipment on
Refer to
page 6 .
Keep your hands and feet away from the
blade.
Do not cut without the blade guard
attached.
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Always provide for
good ventilation.
Sparks from the cutting blade can cause
fire in fuel, wood, clothes, dry grass or
other flammable materials.
Make sure that the cutting blade does not
have cracks or other damages.
Do not use circular saw blades.
No lifting point.
The product is not domestic waste.
2282 - 002 - 07.02.2024
Noise emission to the environment label
as per EU and UK directives and
regulations. The guaranteed sound power
level of the product is specified in
and vibration emissions TS 300 E on page
19 and on the label.
This product is in compliance with
applicable EU directives.
The product conforms to the applicable
UK regulations.
Other symbols/decals on the product refer to special
certification requirements for some markets.
Type plate
1
HUSQVARNA AB, HUSKVARNA, SWEDEN, MADE IN CHINA
11
XXXXXXXXXXXX
Serial No. XXXX
XXXX V~
10
XXXXXX A XXXXXX
Ø
9
XXXXXXX
MAX
8
7
1. Product name
2. Article number
3. Frequency
4. Blade speed
5. Bore diameter
6. Power
7. Weight
8. Blade diameter
9. Current
10. Voltage
11. Serial number
Product damage
We are not responsible for damages to our product if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Noise
XXXXXXXXX
XXXXXXXXXXXXXXX
XX kW XXX Hz
n /min
kg XXXXXX
Ø
XXXXXXX
mm mm
BORE
6
2
3
4
5
3