Werbung
Verfügbare Sprachen
Verfügbare Sprachen
warnings and instructions may result in
electrical shock, fire and/or serious injury.
•
Use personal protective equipment. Refer to
Personal protective equipment on page 6 .
•
The information in this manual is not a replacement
for professional knowledge and experience. If you do
not feel safe in the situation that you are in, stop
the product. Do not use the product in unknown
situations.
•
Turn to your servicing dealer or Husqvarna if you
have questions about the operation of the product.
We can give you information about how to operate
your product safely with best result.
•
Do not operate the product unless you receive
training before use. Make sure that all operators
receive training.
•
Make sure that you always can stop the product
quickly in an emergency.
•
Do not use the product if you are tired, ill, or under
the influence of alcohol, drugs or medicine.
•
Sudden appearance of persons and animals can
prevent safe operation of the product. Always
operate the product carefully.
•
Prevent accidental start. Make sure to push the OFF
button.
•
Before you go away from the product, stop the motor
and disconnect the power cord. Make sure that there
is no risk of accidental start.
•
Do not use a product that has been changed from its
factory specification.
•
Make sure your tools are sharp and clean in order
to enable safer work. Refer to
13 .
•
Make sure that the product is assembled correctly.
Refer to
Assembly on page 8 .
•
Do not use the product if there are signs of damage.
•
Keep all parts in good condition and make sure that
all fixtures are correctly tightened.
•
Always use approved accessories. Speak to your
dealer for more information.
•
Make sure that the blade is correct to use for the
current material. Speak to your dealer for more
information.
•
Do not cut in asbestos materials.
•
Do not put tools or other objects on the product.
•
Make sure that the daily maintenance is done before
you start the motor. Refer to
13 .
•
Make sure that you are in a safe and stable position
during operation.
•
Do not stand on the product.
•
Do not overreach. Keep distance between your face
and the cutting blade. Use 2 hands on the work
piece and make sure that your hands are on a safe
distance from the cutting blade.
6
Introduction on page
Maintenance on page
•
To use the plunge function 1 hand is put on the
cutting handle to adjust the cutting blade.
•
Do not overload the product, it can cause damage to
the product.
•
Make sure that the depth set lock is loose and to lift
the blade before the blade is angled.
•
Make sure that the direction that the blade rotates
is correct. The arrow on the blade guard shows the
correct direction.
•
Make sure to feed the work piece along the direction
of rotation of the blade.
•
Do not grind with the side of the blade. The blade
can break and this can cause vast damage. Use only
the cutting section of the blade.
•
Keep the motor on until the fan comes to a complete
stop.
Personal protective equipment
WARNING:
and all instructions. Failure to follow the
warnings and instructions may result in
electrical shock, fire and/or serious injury.
•
Always use approved personal protective equipment
when you operate the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the correct
personal protective equipment.
•
Use protective gloves.
•
Use boots with steel toe-cap and non-slip sole.
•
Use approved work clothing or equivalent close-
fitting clothing that has long sleeves and long legs.
•
Do not use jewelry or other items that can get caught
in moving parts. Put your hair up safely above
shoulder level.
•
Use an approved respiratory protection. The product
causes dust that is bad for your health.
•
Always use approved hearing protection while
operate the product.
•
Use approved eye protection with side protection.
•
Make sure that you have a first aid kit near.
•
Sparks can occur when you operate the product.
Make sure that you have a fire extinguisher near.
Read all safety warnings
2282 - 002 - 07.02.2024
Werbung
