eQ-3 HomeMatic IP HmIP-eTRV-C-2 Montage- Und Bedienungsanleitung Seite 40

Start-up
5 Start-up
5.1 Teaching-in
Please read this entire section before starting
the teach-in procedure.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2/CCU3. For detailed information about
teach-in or configuration via a control unit,
please refer to the Homematic IP User Guide,
available for download in the download area of
www.homematic-ip.com.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
To integrate the radiator thermostat into your system and
to enable control via the Homematic IP app, you must
teach-in the device to your Homematic IP Access Point
first.
To teach-in the radiator thermostat, please proceed as
follows:
• Open the Homematic IP app on your smart-
40