Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Restore factory settings
8
Restore factory settings
The factory settings of the device can be restored.
If you do this, you will lose all your settings.
To restore the factory settings of the radiator thermostat,
please proceed as follows:
Open the lock (F) of the battery compartment (E)
•
using the supplied four Allen head wrench (see
figure 2).
Remove the battery compartment cover (B) to
•
the back and downwards to remove it from the
device (see figure 3).
•
Remove a battery.
•
Insert the battery ensuring that the polarity is
correct (see figure 8) while pressing and holding
down the system button (C) for 4s at the same
time, until the LED will quickly start flashing or-
ange (see figure 4).
•
Release the system button again.
•
Press and hold down the system button again for
4 seconds, until the LED lights up green.
•
Release the system button to finish the proce-
dure.
The device will perform a restart.
56
Werbung
