Werbung
PERMITTED USE - This machine has been designed and built for the transversal cutting
and contouring of plastic and wood.
UNINTENDED USE - IT is forbidden to:
• operate on ferrous materials;
• operate on organic materials and/or food stuff s;
• operate on materials which may release toxic substances during the work process;
• use any type of lubricant during cutting.
This machine is not suitable for use in potentially explosive environments.
RESIDUAL RISKS
Shearing, cutting and severing hazard - Risk indicated by this symbol:
Precautions to be taken
• During the cutting phase do not wear work gloves.
• Keep hands away from the work area.
• Never remove cutting residues or workpiece fragments when the tool is rotating.
Friction or abrasion hazard - This risk is due to the presence of the rotating blade.
Precautions to be taken
• When working with the tool do not wear work gloves.
• Keep hands away from the work area.
• Never remove cuttings or fragments from the machine when the blade is rotating.
Risk of fl ying debris - This risk is due to the presence of the rotating tool.
Precautions to be taken
• When working with the tool, always wear the necessary personal protective equipment:
safety goggles, safety shoes.
• Keep your face away from the cutting area;
• Never bring hands anywhere near the cutting zone;
• To avoid breaking the blade, reduce pressure as soon as the blade comes into
contact with the workpiece;
• Lessen the cutting pressure to safeguard the machine.
INFORMATION CONCERNING NOISE - The noise values indicated are emission levels
and not necessarily safe operating levels. While there is a correlation between emission
levels and exposure levels, this cannot reliably be used to determine whether or not further
safety precautions are needed. Factors which infl uence the real level of a worker's exposure
include the duration of exposure, the characteristics of the working environment, other
sources of noise, for example the number of machines or operations being carried out in
the near vicinity. Furthermore, levels of safe exposure may be fi xed diff erently from one
country to another. This information does however help the machine user to better assess
the hazards and risks.
It is advisable to use suitable hearing protection such as earmuff s or ear plugs.
INFORMATION ON ELECTROMAGNETIC COMPATIBILITY - Electromagnetic emissions
from the machine do not exceed the limits defi ned by the relative standards for the envisaged
conditions of use.
Check that the power supply system is equipped with a thermomegnetic circuit breaker
to protect all conductors from short circuit and overloads.
EN
USE
57
Werbung
