Herunterladen Diese Seite drucken

Femi job Line VB 28-191 Gebrauchs- Und Wartungsanleitung Seite 100

Bandsägemaschine

Werbung

PRIMA DI ESEGUIRE QUALSIASI INTERVENTO DI MANUTENZIONE, FERMARE LA
MACCHINA E FARLA RAFFREDDARE.
• Indossare i guanti di protezione.
• Indossare la protezione idonee per le vie respiratorie.
• Evitare di usare getti di aria compressa.
Quando necessario:
1. rimuovere con un aspiratore o con un pennello i trucioli residui di lavorazione intervenendo nella
zona di taglio e sui piani di appoggio.
2. Aprire la porta inferiore: pulire la parte inferiore del carter, le guide della lama, gli elementi di
comando
3. Smontare e pulire il fi ltro dell' aspiratore battendolo.
Ogni giorno:
1. rimuovere con un aspiratore o con un pennello i residui di lavorazione e le polveri dalla macchina,
compreso il cavo di alimentazione.
2. Tenere sempre pulita la zona circostante la macchina, compresa la pavimentazione.
Una volta alla settimana:
scollegare il fi ltro o la condotta di scarico e pulire accuratamente l' aspiratore.
Ogni giorno:
1. Verifi care l'integrità del cavo di alimentazione.
2. Verifi care le integrità delle protezioni.
3. Verifi care l' integrità e l'usura della lama.
BEFORE PERFORMING ANY MAINTENANCE WORK, STOP THE MACHINE AND LET IT
COOL DOWN.
• Wear protective gloves.
• Wear suitable airway protection PPE.
• Avoid using jets of compressed air.
When necessary:
1. Remove any shavings or work residues from around the cutting zone and the work surfaces using a
small brush or vacuum cleaner.
2. Open the bottom door: clean the bottom part of the guard, the blade guides and the control elements.
3. Disassemble the dust extractor fi lter and clean it by tapping it.
Every day:
1. Remove any work residues and dust from the machine, including the power cable, using a small
brush or vacuum cleaner.
2. Always keep the work area around the machine, including the fl oor, clean and tidy.
Once a week:
Disconnect the exhaust fi lter or conduit and clean thoroughly with a vacuum cleaner.
Every day:
1. Check that the power cable is intact.
2. Check that all guards are intact.
3. Check that the blade is intact and shows no signs of wear.
PULIZIA
IT
VERIFICHE
IT
CLEANING
EN
CHECKS
EN
100

Werbung

loading