Using The Appliance; The Attachments - Silvercrest SMPSA 3.7 A1 Bedienungsanleitung

5) Pull the mains adapter from the mains power socket and disconnect the
USB charging cable 8 from the appliance.
Note: If the charge level indicator 5 flashes red, the battery is low.
Charge the appliance immediately.

Using the appliance

The attachments

■ Sapphire cone q:
For removing dry skin, hardened skin or calluses on the sole of the foot
and heel and for working on the nails.
♦ Guide the sapphire cone q over the parts of the sole and heel to be
treated using a circular motion while exerting gentle pressure. Do not
press too firmly, and always guide the appliance carefully to the sur-
face to be treated. Apply a moisturising cream after every treatment.
■ Felt cone w:
For smoothing and polishing nail edges after filing and for cleaning the
nail surface.
♦ Use the felt cone w to polish and smooth the edge of the nail and to
clean the nail surface after grinding. Always polish in a circular motion
and never let the felt cone w stay in one place.
■ Sapphire disc (coarse) e / sapphire disc (fine) r:
For filing and working the nails.
Work the edge of the nail using the sapphire disc e/r. Since only the
inner disc rotates and the outer edge does not move, you can file your
nails accurately without damaging your skin with the rapidly rotating disc.
Use the coarse sapphire disc e for thicker nails.
♦ Always work from the outside of the nail to the tip.
■ Flame file t:
You can use the flame file t to free ingrowing toenails.
♦ Carefully guide the flame file t to the treatment area and remove the
affected parts of the nail.
SMPSA 3.7 A1
GB │ IE │
11 ■