Before first use
Using the appliance
SGM 110 A1
Downloaded from
www.Manualslib.com
1) Clean the appliance as described in the section "Cleaning" to remove any
transport dust. Dry it thoroughly.
2) Place the appliance on a stable and level surface.
NOTE
►
Always use distilled water for making face masks!
1) Insert the connector plug
2) Insert the plug into a mains power socket. A beep sounds and the indicator
lamp
lights up green, then flashes green continuously.
3) Place the mask mould
notch at the end extends underneath the device and bends around the
bulge at the bottom of the appliance (see Fig.1):
Fig. 1
manuals search engine
into the socket
on the appliance.
in front of the appliance in such a way that the
GB│IE│NI
7
■
│