Silvercrest SMPSA 3.7 A1 Bedienungsanleitung Seite 16

Note: The attachments do not have as much effect on softened skin.
Therefore, do not carry out any pretreatment in a water bath before using
the appliance.
1) Find a well-lit place to work.
2) Insert the appropriate attachment for your purpose in the attachment
socket 1. The attachment must sit securely.
3) If necessary, put the dust protector a on the attachment so that it audibly
clicks into place at its base:
4) Switch on the appliance by sliding the On/Off/Direction switch 6 to a
position other than "0":
–
To the right for clockwise rotation
indicator 5 lights up green.
–
To the left for anticlockwise rotation
indicator 5 lights up red.
The LED light 0 lights up to illuminate the working area optimally.
Notes:
► Always select the direction of rotation for treating the nails in their direction
of growth. If possible, treat the nails from the outside towards the inside
(to the nail tip). Otherwise, the nails will split more easily.
If you feel that the nails could crack during treatment, select the other
direction.
SMPSA 3.7 A1
, the LED rotation direction
, the LED rotation direction
GB │ IE │
13 ■