Using The Main Menu - Dometic POWER & CONTROL M9LQAHD Montage- Und Bedienungsanleitung

7.2 Switching the monitor to
standby
Press the button or swipe up on the touch-
screen.
The button lights up red. The touchscreen
switches off.
7.3 Moving through and adjusting
settings
NOTE Which buttons can be used for
moving the selection and confirm a se-
lection depends on the screen that is
displayed.
Method 1
The method 1 must be used if no control
bars or and buttons are displayed.
Press the or
Press the button to confirm the selection.
Tap the corresponding button on the touch-
screen to be set.
10
button to move the cursor.
Method 2
The method 2 must be used if control
bars or and buttons are displayed.
Press the button to move the cursor.
Press the or
ed settings.
Tap the button of the setting that shall be ad-
justed.
If present, press and drag the control bar to
the le or right.
7.4 Exiting the settings
The displayed settings/menu can be exited to display
the previous screen. If the settings or a menu are
open and the monitor is not operated for several
seconds, the settings/menu close automatically.
Press the button.
If present, tap the
screen.
7.5

Using the main menu

Displaying/hiding the main menu
Press the button.
Tap on the lower part of the touchscreen to
display the main menu.
Tap on the middle or upper part of the touch-
screen to hide the main menu.
button to adjust the select-
button on the touch-