Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NOTE
Do not use cleaning agents or solvents.
You may otherwise irreparably damage
the product.
Be careful with the line cutter
cause serious lacerations.
Keep clean the ventilation slots, motor
o
housing and handles of the product. Use a
damp cloth or a brush.
After every trimming session, remove grass
o
and soil from the protective cover
the trimming assembly.
Maintenance
NOTE
Prior to every use, check the product for
obvious defects such as loose, worn or
damaged parts.
Check covers and safety devices for
damages and correct installation.
Replace as necessary.
Replacing the spool (Fig. D)
NOTE
The rotation direction of the line spool
o
is indicated in the spool cap
the spool. The arrows on the cover of
the spool cap indicate the direction of
rotation of the motor.
Check the line cutter
o
the product without a line cutter or with
a defective line cutter. If the line cutter
is damaged, be sure to contact the
customer service center.
1. Remove the battery
2. Press the two releases
open the spool cap.
3. Remove the cover of the spool cap. Take
out the line spool.
4. Press the thread ends of the new spool out
of the spool slots
[
. It can
[
]
and
[
]
[
on
[
]
. Never use
[
]
from the product.
[
]
simultaneously to
[
]
.
]
5. Insert the new spool into the spool cap.
The side of the spool on which the rotation
direction is indicated by arrows, must be
visible after insertion.
6. Insert both ends of the thread through the
opposite line outlet loops
7. Put the back on the spool cap. Make sure
that the latches on the lid fit precisely into
the recesses on the spool cap. They will
snap in noticeably.
8. Pull on the line ends and press the locking
button
repeatedly until the line ends
[
]
protrude approx. 1 cm beyond the line
cutter
.
[
]
Winding up the spare thread (Fig. D)
1. Thread an end of the spare thread through
the opening of the spool
2. Wind the thread in the threading direction
of the spool
[
top of the spool.
˜ Replacement parts/
Accessories
Compatible replacement parts for
this product can be purchased at
www.Optimex-Shop.com. Please have the
order number ready for your order. Orders
]
can only be placed and processed online.
If you are not sure where you can purchase
compatible parts, please contact the Lidl
Service Hotline.
Position Description Order number
Line spool
[
]
˜ Storage
Store the product in a dry and dust-
o
protected place out of reach of children.
Remove the battery
o
the product is stored for a long period.
.
[
]
.
[
]
. Follow the arrows on the
]
99940803701
from the product, if
[
]
GB/IE/NI
21
Werbung
