Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Protective footwear
–
–
Protective clothing
˜ Mounting the product
m
WARNING! Risk of injury!
Wear safety gloves!
Wear ear protection!
Wear eye protection!
Wear protective, slip-resistant
footwear!
m
WARNING! Risk of injury!
Remove the battery
u
before assembly. Insert the battery
only once the product is completely
assembled.
1. Mounting the distance roller
(Fig. B): Push the distance roller
through the holes on the motor head
far as possible. The distance roller points
upwards.
2. Mounting the protective cover
(Fig. C): Place the protective cover
the motor head.
3. Tighten the protective cover with 4 Phillips
screws
.
[
]
4. Mounting the additional handle
(Fig. E): Unscrew and remove the pre-
assembled handle screw
handle
.
[
5 ]
5. Slide the auxiliary handle
handle holder
[
spare spool
points upwards.
4 ]
[
6. Insert the handle screw
through hole on the handle holder.
7. Screw on the auxiliary handle with the
handle screw (Fig. E).
16 GB/IE/NI
from the product
[
]
[
]
[
]
on
[
]
of the auxiliary
[
]
over the
5 ]
[
. The receptor for the
]
through the
[
]
˜ Inserting/removing the
battery
Removing the battery: Press the
o
release button
battery
.
[
]
Inserting the battery: Place the
o
battery on the guide track and push it into
the product. The battery audibly snaps in.
˜ Charging the battery
NOTE
Allow a hot battery
before charging.
Only charge the battery if the red LED on
the charge status indicator
1. Remove the battery from the product if
required.
2. Insert the battery in the charging
compartment of the battery charger
3. Connect the charger to a mains outlet.
4. Once the battery is fully recharged, unplug
the charger from the mains outlet.
5. Remove the battery from the charger.
as
and pull out the
[
]
to cool down
[
]
lights up.
[
]
[
.
]
Werbung
