TERMOFOL TF-WIFI Mark II Benutzerhandbuch Seite 31

Select ‚Confirm slow blinking display' and press ‚Next'. In the next step, enter your network
name and password. Press ‚Next' and ‚Connect now'. Select the ‚Smartlife-XXXX' Wi-Fi signal.
Go back to the application and press ‚Connect'. The application will connect automatically. This
may take up to 90 seconds.
After adding the device, you can edit the room name.
For the purpose of selecting a device to control, click on the bar with its name, which opens
the device screen. The screen displays information about the current air temperature and the
status of the device - the flame indicates the operating status, i.e., power supply to the heating
device. Using the semi-circular slider or directly the ‚+' and ‚-' buttons, you can change the set
temperature value.
The buttons on the bottom bar can be used to, respectively:
– switch the thermostat on and off, – switch the operating mode from manual to
automatic and vice versa, – lock and unlock the control buttons, and – change the
advanced thermostat options and parameters. To return to the main application window,
press the ‚back' command in the upper left corner of the application screen.