TERMOFOL TF-WIFI Mark II Benutzerhandbuch Seite 30

This further confirms that the entire connection process has been successful and you can pro-
ceed to control and configure the thermostat with the application.
CONNECTING THE THERMOSTAT TO THE APPLICATION – METHOD 2
With the thermostat switched on, press and hold SET + OK until the flashing symbol . Może
appears. This may take 5-20 seconds. If the symbol is also flashing, press SET + OK again
until the flashing symbol appears. Having the thermostat ready, launch the TEMOFOL
SMART application and after logging into the application on the main screen select the add
device function. In the upper right corner change EZ Mode to AP Mode.
Mode AP