TERMOFOL TF-WIFI Mark II Benutzerhandbuch Seite 24

DISPLAY ICONS – SPECIFICATION
icon
AUTO
stat operation in the automatic
schedule mode
AUTO
temporary manual mode
holiday mode
switching off the heating,
caused by high temperature
of floor
icon of Cloud connection
NTC
SETTING THE OPERATING SCHEDULE
When the thermoregulator is on, press the button
enables the user to move to the next position. Change the values with the
arrows. It is possible to set the temperature for 6 periods. The factory selected
schedule mode is 5+2
The table below shows the factory-set day cycle.
Programming of heating periods during a day:
Press for 3-5 sec.
--> set the temperature for the first period. Repeat the operation for all heating
periods P1-P6, then repeat the scheme for weekend days going through points 6,7.
Wake - up Leaving home
06:00 20 °C 08:00
ADVANCED SETTINGS A
When the thermoregulator is switched off, press the button
next parameter, press the button
are saved automatically. After setting the required values, switch on the thermoregulator.
confirming the
external temperature sensor
--> set the start time of the first period with the arrows --> press
Returning
home
15 °C 11:30
thermo-
CLOCK
Leaving home
15 °C 13:30
. Use the arrows to change the values. The values
no Wi-fi connection
manual mode
Wi-fi
clock
button lock
for 3-5 seconds. The button
Returning
home
15 °C 17:00 15 °C
for 3-5 sec. To go to the
Sleep
22:00 15 °C