TERMOFOL TF-WIFI Mark II Benutzerhandbuch Seite 32

CHANGING THE CONFIGURATION OF THE TEMPERATURE SENSORS
Upon selecting the button
advanced functions arranged in the form of horizontal bars, described with the name of a gi-
ven function and information about the current value of each function, presented at the right
edge of a given row. In order to change a given parameter/function click on the ‚>' sign at the
end of the row of the function you want to modify. Before editing, you will be asked to confirm
your permissions by entering admin password, which by default is set to ‚123456'. For exam-
ple, if you want to change the configuration of temperature sensors, select the ‚Temperature
sensor' line and then from the context menu developed at the bottom of the screen select for
example the ‚Built-in Sensor' and click ‚Done'.
CHANGING THE MAXIMUM TEMPERATURE VALUE OF THE EXTERNAL SENSOR
Upon selecting the button,
advanced functions arranged in the form of horizontal bars, described with the name of a
given function and information about the current value of each function, presented at the
right edge of a given row. In order to change a given parameter/function click on the ‚>' sign
at the end of the row of the function you want to modify. Before editing, you will be asked to
confirm your permissions by entering admin password, which by default is set to ‚123456'. If
you wish to change the value of the maximum temperature of the heating device measured by
the external temperature sensor, select the ‚High temperature protection' line and from the
context menu developed at the bottom of the screen select a specific temperature level, e.g.,
29°C, by moving down or up and click ‚Confirm'.
the ‚Setting' screen appears. It contains a list of settings and
the ‚Setting' screen appears. It contains a list of settings and