TERMOFOL TF-WIFI Mark II Benutzerhandbuch Seite 23

When the thermoregulator ON, touching the button
user to program the thermoregulator operating schedule.
When the thermoregulator OFF, touching the button for 3-5 seconds enab-
les the user to configure the advanced B settings.
When the thermostat is ON, a short press enables the user to set the time and day
of the week. Whereas, if touched for 3-5 seconds, the holiday mode can be activa-
ted. Pressing in the
to setting
to set the temperature maintained in the above mode.
Cursor button for dialling down. When the thermoregulator is switched on,
pressing and holding it down for more than 3 seconds switches the child
lock on and off. Repeated presses decrease a value of set temperature.
Cursor button for dialling up. When the thermoregulator is switched on,
pressing and holding it down for more than 3 seconds makes it possible
to have a read-out of the temperature measured by an external floor NTC
temperature sensor (only if, in the advanced settings B, the parameter BN is
set to N3). Repeated presses increase a value of set temperature.
When the thermoregulator is operating in the automatic schedule mode, the but-
tons allow for a temporary temperature correction in respect of the current
period of the automatic schedule of the performed by the thermostat.
6 programmable
periods
floor sensor
WIFI
selected weekly
programme
automatic mode
manual mode
position activates this mode. Then clicking switches the user
the number of days in this mode. Another press
holiday mode
for 3-5 seconds enables the
time-hour
enables the user
week
set temperature
air temperature
enabled heating
mode
lock