Stihl HSE 61 Gebrauchsanleitung Seite 34

English
suitable for outdoor use. Use of an extension
cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating an electric power tool in a damp
location is unavoidable, use a residual cur‐
rent device (RCD) protected supply. The use
of an RCD reduces the risk of electric shock.
18.4 Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating an electric
power tool. Do not use the electric power tool
if you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating the electric power
tool may result in serious personal injury.
b) Use personal protective equipment. Always
wear safety glasses. Protective equipment
such as a dust mask, non-skid safety shoes,
a hard hat or hearing protection fit for the
respective type of electric power tool and the
respective job will reduce personal injuries.
c) Prevent unintentional starting. Check that the
electric power tool is switched off before you
connect it to the mains and/or the battery,
pick it up or carry it. Accidents can happen if
you carry the electric power tool with your
finger on the ON/OFF switch or with the elec‐
tric power tool switched on.
d) Remove any setting tools or wrenches
before turning the electric power tool on. A
tool or spanner left attached to a rotating part
of an electric power tools can lead to injury.
e) Avoid placing your body in an unnatural posi‐
tion. Keep proper footing and balance at all
times. This enables better control of the elec‐
tric power tool in unexpected situations.
f) Wear suitable clothing. Do not wear loose
clothing or jewelry. Keep your hair and
clothes away from moving parts. Loose
clothes, jewelry or long hair may be caught in
moving parts.
g) If dust extraction and collection devices can
be mounted, they should be connected and
used correctly. Use of dust collection can
reduce dust-related hazards.
h) Do not be lulled into a false sense of security
and do not disregard the safety rules even if
you are thoroughly familiar with the electric
power tool. Carelessness can result in seri‐
ous injuries within fractions of a second.
34
18 General Power Tool Safety Warnings
18.5 Handling and use of electric
power tools
a) Do not force the electric power tool. Always
use an electric power tool that is intended for
the task you are undertaking. The correct
electric power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use an electric power tool if its switch
is defective. Any electric power tool that can‐
not be switched on or off via the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or take a removable battery pack out of
the electric power tool before making any
device adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of starting
the electric power tool accidentally.
d) Unused electric power tools must be stored
out of the reach of children. Do not let any‐
one use the electric power tool who is not
familiar with it or has not read the instruc‐
tions and advice. Electric power tools are
dangerous in the hands of untrained users.
e) Maintain electric power tools and accesso‐
ries with care. Check for misalignment or
jamming of moving parts, breakage of parts
and any other condition that may affect the
functionality of the electric power tool. If
damaged, have the electric power tool
repaired before use. Many accidents are
caused by poorly maintained electric power
tools.
f) Keep cutting tools clean and sharp. Carefully
maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to
control.
g) Use the electric power tool, accessories, tool
bits etc. in accordance with these instruc‐
tions, taking into account the working condi‐
tions and the work to be performed. Use of
the electric power tool for operations different
from those intended may result in a hazard‐
ous situation.
h) Keep handles and grip surfaces dry, clean
and free from oil and grease. Slippery han‐
dles and grip surfaces do not allow proper
operation and control of the electric power
tool in unforeseen situations.
18.6 Service
a) Have your electric power tool serviced by a
qualified repair person using only genuine
0458-279-9901-A