Stihl HSE 61 Gebrauchsanleitung Seite 31

14 Maintenance and Repairs
HSE 71
700 mm blade:
Handle, left:
Handle, right:
HSE 81
500 mm blade:
Handle, left:
Handle, right:
HSE 81
600 mm blade:
Handle, left:
Handle, right:
HSE 81
700 mm blade:
Handle, left:
Handle, right:
The K‑factor in accordance with Directive
2006/42/EC is 2.0 dB(A) for the sound pressure
level and sound power level; the K‑factor in
accordance with Directive 2006/42/EC is
2
2.0 m/s for the vibration level.
The sound and vibration levels indicated were
measured according to a standardized test
method and can be used as a basis for compar‐
ing electric power tools. The actual sound and
vibration levels may vary from the values indica‐
ted, depending on the type of application. The
sound and vibration levels indicated can be used
for an initial estimate of the sound and vibration
stress. The actual sound and vibration stress has
to be estimated. The times can be taken into
account in the estimate when the electric power
tool is switched off and also when it is switched
on but running without any load.
For information on compliance with the Vibration
Directive 2002/44/EC, visit
www.stihl.com/vib
13.5 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorization and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation (EC) No. 1907/2006 see
www.stihl.com/reach
14 Maintenance and Repairs
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
0458-279-9901-A
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
2
3.8 m/s
ized STIHL servicing dealer. STIHL dealers are
2
2.6 m/s
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
2
3.2 m/s
When repairing the machine, only use replace‐
2
2.1 m/s
ment parts which have been approved by STIHL
for this power tool or are technically identical.
Only use high-quality replacement parts in order
2
3.5 m/s
to avoid the risk of accidents and damage to the
2
2.5 m/s
machine.
STIHL recommends the use of original STIHL
replacement parts.
2
3.5 m/s
Original STIHL parts can be identified by the
2
2.5 m/s
STIHL part number, the { logo and the
STIHL parts symbol K (the symbol may appear
alone on small parts).
15 Disposal
Contact the local authorities or your STIHL serv‐
icing dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
16 EC Declaration of Con‐
ANDREAS STIHL AG & Co. KG
Badstr. 115
D-71336 Waiblingen
Germany
erklärt in alleiniger Verantwortung, dass
Designation:
Make:
Series:
formity
Electric hedge trimmer
STIHL
HSE 61
HSE 71
English
31