Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
Switching on and off
Check the attached tool before use to ensure that
all fastening elements are correctly fitted.
NOTE
►
Always switch on the angle grinder before
making contact with the material, then apply
it to the workpiece.
►
If the appliance blocks due to an overload
and switches off, it will restart automatically
as soon as the cause of the blockage is
removed (auto-start function).
Switching on
♦
First, press the ON/OFF switch
so that you can then press it forwards.
Switching off
♦
Let go of the ON/OFF switch
Switching to continuous operation
♦
First, press the ON/OFF switch
so that you can then press it forwards. Then
press the ON/OFF switch
down until it engages.
Switching off continuous operation
♦
Press the ON/OFF switch
downwards and release it.
Adjusting the rotational speed
You can use the adjusting wheel for speed pre-
selection
to preselect the rotational speed:
(1 = slower speed, 6 = faster speed).
We recommend you carry out practice tests to
determine the correct speed.
The speed can also be changed during operation.
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
The battery angle grinder is maintenance-free.
PWSA 20-Li F4
■
■
■
■
■
■
to the right
.
to the right
forwards and
Disposal
to the rear and
subject to Directive 2012/19/EU. This directive
states that this appliance may not be disposed of in
the normal household waste at the end of its useful
life, but must be taken to specially set-up collection
locations, recycling depots or disposal companies.
The disposal is free of charge for the user.
Protect the environment and dispose of this
appliance properly.
Do not use any sharp objects for cleaning the
appliance. Never permit liquids to penetrate
inside the appliance. Otherwise the appliance
could be damaged.
Clean the appliance regularly, preferably imme-
diately after completion of the work.
Clean the housing with a dry cloth – do not use
petrol, solvents or cleaners which can attack the
plastic.
A vacuum cleaner is required for thorough
cleaning of the appliance.
Ventilation openings must never be obstructed.
Remove any sanding dust stuck to the appliance
with a brush.
NOTE
►
Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
WARNING!
►
Do not use any accessories not recom-
mended by PARKSIDE. This can lead to
electric shock and fire.
Do not dispose of power tools
in your normal domestic waste!
The adjacent symbol of a crossed-out
dustbin means that this appliance is
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product.
GB │ CY
│
13
■
Werbung
