Safety information/Transport, storage, mounting, disposal
4.
Transport, storage, mounting, disposal
4.1
Transport
Only transport the IRHP 200 in its original packaging. The IRHP 200 may only be packed
after it has cooled down.
4.2
Storage
The IRHP 200 must be stored in a dry environment.
4.3
Mounting
Should the above components be damaged or incomplete, please contact your supplier.
ersa IRHP 200
Attention risk of fatal injury!
Only experienced and qualified electricians may perform repair work. The
device contains live parts. There is a risk of fatal injury if inexperienced
personnel work on the unit.
Attention!
Damaged housing elements and lines must be replaced immediately. Only
use original Ersa replacement parts.
Attention!
Ensure that ventilation apertures are free of residue and moisture.
Verify the scope of delivery of the system.
Scope of delivery consists of
1 x RA 4500 D controller
1 x heating plate
1 x RA4500A operating instructions
1 x IRHP 200 operating instructions
3BA00133 • 2013-06-25 • Rev. 5
21