Proper Use - ersa IRHP 200 Betriebsanleitung

Introduction
1.3

Proper use

The Ersa IRHP 200 has been built in accordance with the state of the art and standard
health and safety regulations. Residual hazards can exist with the system, particularly if it
is operated improperly by untrained personnel, or if it is used for purposes for which it is
not intended (proper use).
The Ersa IRHP 200 is designed exclusively for preheating electronic modules using special
PCB holders. Any other use, or use exceeding this specification, is considered to be
improper. The manufacturer/supplier assumes no liability for damages resulting from
improper use.
Proper use also involves complying with the instructions in the operating manual, includ-
ing the safety Unauthorized reconstructions and/or modifications which influence the
safety of the Ersa IRHP 200 system are prohibited and the manufacturer/supplier is not
liable for any damages resulting from such additions or modifications.
The IRHP 200 system is designed exclusively for commercial use. Private use is excluded.
ersa IRHP 200
This symbol warns of hazards of any type that can result in physical injury
or property damage
This symbol indicates a hazard of burn injuries caused by touching hot
objects or machine parts.
This symbol indicates that action is required on the part of the device
user.
This symbol indicates additional information.
3BA00133 • 2013-06-25 • Rev. 5
19