Medion MD 24089a Bedienungsanleitung Seite 110

Programming the volume/mute universal functions for another
type of unit
In its delivered state, the universal remote control is programmed in such a way
that the volume and mute functions automatically control the TV set if a source
key for a device with image transmission (DVD, video recorder) is pressed.
You can program the universal remote control so that the universal functions
"Volume" and "Mute" will actuate another device type than the TV set.
1. Keep the
CODE
remains permanently lit.
2. Keep the key pressed down until the blue LED goes off.
3. Press a source key for the device to which the volume and mute functions
should be transferred to. The blue LED stays on.
4. Press the key; the blue LED foes off. If you select a device by mistake that
has no volume control of its own the blue LED flashes for 3 seconds.
Programming the volume/mute universal functions to a
particular device
You can program the universal remote control in such a way that it will use
only that particular device's own volume and mute functions. The universal
function for this mode or device type is therefore switched off.
1. Keep the
CODE
remains permanently lit.
2. Press the key until the blue LED goes out.
3. Press the source key for the device that is only to have its own volume and
mute functions.
4. Press a volume key. The blue LED stays on.
5. Press again and the blue LED goes off.
Restoring the universal volume/mute functions
If you have changed the universal volume and mute functions, as described in
the previous two sections, you can reset the functions back to the factory
settings and thus restore the "Punch Through" effect.
1. Keep the
CODE
remains permanently lit.
2. Hold down the
3. Press again. The blue LED light will extinguish completely. The volume
and mute functions are now restored to their factory defaults.
52
key pressed for approx. 3 seconds until the blue LED
key pressed for approx. 3 seconds until the blue LED
key pressed for approx. 3 seconds until the blue LED
key until the blue LED goes off.