Videoformat; Digital Audio - Medion MD 24089a Bedienungsanleitung

Video format
Here you can set the video format on the SCART connection.
You can only change the video format for the SCART connection. At the
"video" cinch connection only an FBAS signal is available.
If your TV or recorder is connected via a SCART cable select the "RGB" or
"YUV" setting.
If your TV is not connected to the SCART connection, select the "FBAS"
setting.
Volume bypass
Here you can set whether the volume should be controlled on the receiver or
connected devices.
On the connected appliance set the volume to low before modifying the
"Volume bypass" option.
"Off" setting: The volume is set as before on the receiver.
"On" setting: The current receiver volume is fixed. The volume can now only
be changed on the connected device.
Please note that the speaker of the connected device could be damaged
if the volume is set high.
Confirm the setting by pressing "OK" twice.

Digital Audio

Here you can set the output signal for the receiver's digital audio output SPDIF.
You can make the following settings (also in combination):
PCM: 1- or 2-channel (stereo) sound
AC-3: Multiple channel sound
dts: Multiple channel sound
Please note that multi-channel sound is not available from all channel
suppliers and can only be played back with audio appliances that have
the relevant decoder.
40