Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Automatic search

If your device does not respond to the remote control, even though you have
tried all of the codes listed for your device type and the relevant brand, then try
using the automatic search. This will enable you to find codes for brands that
were not listed in the device Code List.
1. Switch the relevant device on manually.
2. Briefly press the required source key (
3. Keep the
CODE
remains permanently lit.
4. Point the remote control at the device and briefly press the key
If the device has no program function, press
The remote control starts the code search after 6 seconds and transmits all
codes consecutively at 1-second intervals (see also next section). The blue
LED will light up for each transmission.
5. As soon as the device responds to the remote control, press
did not press
OK
device responded step by step by pressing
To cancel the search, press
1 second or 3 second intervals
If you want the remote control to transmit a new code every 3 seconds instead
of every second, proceed as follows:
Within 6 seconds of pressing the
4 press the
or
P+
P–
code every 3 seconds. This gives you more time, but the procedure will also
take longer.
Code searching by brand name
This function gives you the option of searching by brand name (see code list).
This is done as follows:
1. Switch the relevant device on manually.
2. Briefly press the required source key (
3. Keep the
CODE
remains permanently lit.
4. Type in the 1-digit code according to the following table:
Key 1 = Medion, Lifetec, Micromaxx, Microstar, Tevion, Videon,
TCM (Tchibo), General Technic, Innovation, Magnum
Key 2 = Philips, Erres, Pye, Philco, Rodiola
Key 3 = Sony, Akai, Panasonic, JVC, Sharp, Toshiba, JVC, Daewo
MD 24089a
key pressed for approx. 3 seconds until the blue LED
at the right time, you can return to the code to which the
.
EXIT
(or
P+
key again. The remote control will now only transmit a new
key pressed for approx. 3 seconds until the blue LED
TV, DVD, VCR, AUX
or
POWER
key.
P–
or
) key as described in point
POWER
TV, DVD, VCR, AUX
).
once.
P+
in stead.
. – If you
OK
).
49
UK

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis