Operating The Appliance; Using The Basic Functions; Setting Volume - Medion MD 24089a Bedienungsanleitung

Operating the appliance

The appliance is supplied pre-channelled.
No specialist knowledge is required to simply use the appliance. In addition to
these user instructions many functions are explained in the on-screen notes.

Using the basic functions

Starting the appliance - standby
If the device is connected to the power, the control lit is lit.
Switch your TV on and select the AV mode.
Press the "
STANDBY
Just like a computer, when you start the digital receiver it first has to load
an operating program. The appliance may take a few seconds to respond.
At the same time the manufacturer's logo is shown on the -screen.
To switch to standby operation press the "
indicator lights up.

Setting volume

Volume changes also affect any video recording that is currently taking
place. In this case change the volume directly on the TV.
To increase the volume press the "
To decrease the volume press the
The volume level is shown by a bar on the screen.
To mute the sound press the "
To hear the sound again press the "
" " keys; the volume bar is shown again.
–
If the " Volume-Bypass " option is activated (refer to page 40) it is not
possible to set the volume from the receiver's remote control.
MD 24089a
" key. The channel number is shown on the screen.
" key.
+
"–" key.
" key. The symbol is shown on the screen.
" key again or press the "
" key. The time
STANDBY
UK
" or
+
19