Normal Operation - Medion MD 24089a Bedienungsanleitung

Key 4 = Thomson, Brandt
Key 5 = Telefunken, Saba, Nordmende, Fergusson, Baird
Key 6 = Grundig, Blaupunkt
Key 7 = Nokia, Finlux, ITT
Key 0 = all brands.
5. Continue pressing the
the device responds accordingly. Proceed quickly, otherwise the automatic
code search will start.
6. Save the code by pressing
If all the codes have been searched, the blue LED will flash for approx. 3
seconds.
Code identification
Code identification gives you the opportunity to determine codes that have
already been entered and stored in the remote control. Proceed as follows:
1. Switch the relevant device on manually.
2. Briefly press the required source key (
3. Keep the
CODE
remains permanently lit.
4. Briefly press the CODE key. The blue LED will briefly extinguish after the
key has been pressed.
5. To find the first number, press the number keys from 0 to 9. If the blue LED
extinguishes briefly, then it is the first stored number.
6. To determine the second number, press the number keys again from
Repeat the procedure for the third and fourth number.
7. The blue LED will extinguish as soon as the key for the fourth number has
been pressed.
Code identification has now been completed.

Normal operation

After you have finished programming your remote control for your audio/
video devices, the remote control will work in the common main functions just
like the original remote control of the respective device.
Point your remote control at the desired device and press the relevant source
key. The blue LED will light up briefly but will not remain lit.
Activate the functions by pressing the corresponding function key of your
universal remote control. The blue LED will light up briefly each time the key is
pressed.
50
key (or for video recorders
P+
.
OK
key pressed for approx. 3 seconds until the blue LED
POWER
TV, DVD, VCR, AUX
or ), until
).
to
0 9
.