Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product must be installed by a qualified person in
Before installation
accordance with the regulations in force. The
manufacturer shall not be held responsible for
damages arising from procedures carried out by
unauthorized persons which may also void the
The hob is designed for installation in a
commercial worktop. A safety distance must be
left between the appliance and the kitchen walls
and furniture. See figure (values in mm).
MATE
e
lt can also be used in a free standing
Preparation of location and electrical
position. Allow a minimum distance of 750
installation for the product is under
mm above the hob surface.
customer's responsibility.
e
—_(*) If a cooker hood is to be installed above
DANGER:
the cooker, refer to cooker hood
|
manufacturer' instructions regarding
The product must be installed in
installation height (min 650 mm)
accordance with all local electrical
e
Remove packaging materials and transport
regulations.
locks.
|
e
Surfaces, synthetic laminates and adhesives
DANGER:
ee
,
used must be heat resistant (100 °C
Prior to installation, visually check if the
minimum)
product has any defects on it. If so, do
|
|
|
a
°
The worktop must be aligned and fixed
horizontally.
Damaged
products cause risks for your
l
En
i
e
Cut aperture for the hob in worktop as per
installation dimensions.
min.
9/EN
Werbung
