Beko EB 9/41 FHL Gebrauchsanleitung Seite 22

When the metal parts are heated, they may expand and cause noise. >>> This is not a fault.
The mains fuse is defective or has tripped. >>> Check fuses in the fuse box. If necessary,
replace or reset them.
Product is not plugged into the (grounded) socket. >>> Check the plug connection.
IF the display does not light up when you switch the hob on again. >>> Disconnect the
appliance at the circuit breaker. Wait 20 seconds and then reconnect It.
@Consult the Authorised Service Agent or the
dealer where you have purchased the
product if you can not remedy the trouble
although you have implemented the
instructions in this section. Never attempt to
22/EN
repair a defective product yourself.