Sharp VC-FH3GM/SM Serviceanleitung Seite 50

VG-FH3GM/SM
VC-FH5GM-. --
2. Memory recording preset level reprogramming.
1. Similarly to the above step 1-1 and 2 the same operate.
2. Using the CHANNEL (+) AND (-) buttons, select the right function numbers continued from recording preset number
as has been JPO~JP39, which appear in. the fluorescent display tube, referring to the E-PROM map. :
3. Press the STOP or REW. button on the remote contro] unit.
By doing, recording level preset number selected. by turn from the ten keys on the remote control-unit, which appear.
in the fluorescent display tube referring to the E77 ROM map.
Tape speed _ LPorEP p # #
:
t
+
~ Chrominance preset number. (from "0" to "7")
Luminance preset number. (from "0" to "7")
3. Finally make for a moment short: circult test point(P802), both located at the front side 0 on the main PWB to clear the
TEST mode, .
50