ABL Wallbox eM4 Twin Bedienungsanleitung/Sicherheitshinweise Seite 21

Intended use
The eM4 Twin Wallbox has two charging points that can be used simultaneously, making it the ideal solution for
group installations in semi-public areas such as company or hotel car parks. It is also suitable for use in both public
and private areas. The eM4 Twin is available either as a Controller or Extender version for use in a charging group,
but can also be set up for stand-alone use. To ensure intuitive management and billing of all charging operations, the
eM4 Twin Wallbox is available as a reev ready version with backend connection.
Technical information
This document explains how to operate your Wallbox eM4 Twin after it has been installed, configured and commis-
sioned by a qualified specialist electrical contractor. Detailed information on installation and configuration can be found
in the installation instructions, which are provided in digital form (PDF) via the website www.ablmobility.de/en. In
addition, the technical data for your wallbox are collated in product-specific data sheets.
Technical information
Operating manual (this document)
x
Data sheets
x
Installation manual
x
You can download these documents from the ABL website using the following link:
https://www.ablmobility.de/en/service/downloads.php
You can find further information about our product range, as well as about separately available accessory components
on our website at www.ablmobility.de/en.
Safety instructions
DANGER
Dangerous electrical currents
The violation or non-observance of the safety information contained in this manual may lead to electric shock,
fire, severe injury and/or death.
Please read all safety information carefully.
x
Always follow all safety notices provided!
x
Please observe the following notes:
General safety information
Please read this manual carefully.
x
Heed all warnings and follow all instructions.
x
Keep this manual in a safe place where it can be accessed at all times: The contents of this manual, and the
x
safety notices in particular, must be available to all users of the product.
Specialist electrical
User
contractor
Intended use 21